The Treadmill Sensei’s guide on how to replace your treadmill belt
Nihango!
A question I get asked a lot here at the DOJO (and by my wife’s pesky relatives) is: How the heck do I replace a damaged treadmill belt?
If you find your belt slipping, or your deck slowing down and stop, or if the edges of your treadmill belt look worn, frayed or curls up, then you could need to have your treadmill belt replaced. Luckily, replacing the belt is not as tough as you’d think.
The really very first thing you happen to be going to want to do is take a look at your treadmill deck. If the deck looks to be in very good shape then there is a very good likelihood it just needs to be lubricated (or waxed). If you see signs of wear such as scratches or grooves then both the deck and belt are most likely going to want to be replaced.
If the deck appears fine but your belt is torn, curling or frayed, it is time to replace the treadmill belt. Fortunately, treadmill suppliers have created it fairly easy to replace a belt even if you are not the Treadmill Sensei.
Most crucial: Turn your treadmill off and take away the power cord! This way you do not get shocked and you will guarantee the treadmill does not turn on while you are operating on it. That would be undesirable. If your treadmill inclines (which most do), adjusting it a couple of degrees may make the operation a small simpler for you.
You loosen the belt adjustment screws in the back of your treadmill’s deck and then slide the rear roller forward and away from the belt. Eliminate the front roller and then the rear roller. There will be a number of screws along the sides of the deck which attach the deck to the rest of the treadmill. Remove those and you’ll be capable to remove your deck.
At this point you can slide your belt off. Now is a perfect time to go ahead and lubricate your deck as nicely. From there, put on your new belt and reassemble your deck.
Taking the time to wax your treadmill deck whilst the belt is off might be a very good idea. It’ll hold you from possessing to do it all over again later on.
Ultimately, as soon as you have it all back together you are going to want to test the adjustment. Commence your treadmill at a slow speed and walk on it firmly. If the belt stops, hesitates or modifications speed then you’re going to need to have to adjst the rear screws. Adjust as required till you are confident the belt is not slipping or changing speed.
And there you have it, how to replace a treadmill belt.
-The Treadmill Sensei
To know more about it, please go to: flex belt reviews
Related Posts
Tags
Share This
Recent Comments