Computer Hardware Tutorials – Installing a Laptop Difficult Drive
One particular of the couple of elements which is easily upgradable in virtually all transportable computer systems is the tough drive. Laptop computers these days all use the SATA interface which is precisely the exact same as that utilized in desktop computers. The only difference between laptop and desktop hard drives is that the former are smaller sized with a two.five” form element whilst the latter have a 3.5″ form aspect. In fact, it really is achievable to install a laptop difficult drive into a desktop personal computer. Installing a laptop hard drive into your notebook pc is a straightforward method and every single bit as easy as installing 1 in a desktop.
Requirements: Cost-free SATA difficult drive bay
What you need to have: Modest Phillips screwdriver
Time required: 10 minutes
Difficulty: Simple
Step 1 – Preparations
Ensure that your laptop is turned off before continuing. Unplug the power cable and take away the battery pack from its bay in the bottom of the machine. Turn the computer upside-down and locate the difficult drive cover panel. This is usually a rectangular panel in a single of the corners of the machine, about 3.five inches wide. It will generally be held in place by two screws. Some laptops might have a single panel which covers the complete bottom of the computer. Eliminate the panel covering the drive bay.
Step 2 – Eliminate the Current Drive
Normally, you will discover a little screw underneath the challenging drive bay cover panel. This screw will connect a little metal notch at the side or front of the difficult drive to the metal frame of the personal computer. As soon as you have removed this, you should be able to slide the hard drive backwards with little effort. When it comes cost-free from the sockets, basically lift it out of the drive bay and location it aside.
Step three – Set up the New Drive
Simply slide the new drive into the drive bay, pushing it into the power and SATA sockets. Unlike with a desktop computer, there are no cables to connect. With the tough drive firmly seated in spot and effectively connected, put the screw back in the metal tab at the back or side of the drive (if applicable) to fix it in place. Place the drive bay cover back on, ensuring that all of the tabs are locked in place prior to putting the screws back. Your new hard drive ought to be prepared to use as soon as you turn the computer system on once more.
To know more, please go to: dell coupons laptop
Related Posts
Tags
Share This
Recent Comments