Opening The Door To A Gorgeous Garage
In spite of getting the first space that most homeowners see when they enter their houses, the garage is probably the most ignored and least talked-about room when it comes to house improvement.
The standard bland and stained concrete garage floor suffers from years of heavy foot and car traffic. Fortunately, there are techniques to make even the most beat-up garages look wonderful-and homeowners can do it themselves. Skilled concrete epoxy coatings can revitalize a garage floor, make garage cleanup easier and assist stop the need for future pricey floor repairs. Here’s how to restore your floor.
Tools Of The Trade
To restore your garage floor, home owners will need to have Quikrete Epoxy Garage Floor Coating Kit (like instructional DVD). This all-in-one particular, straightforward-to-use kit beautifies and protects concrete garage floors from hot tires, gasoline, oil, scuffs and put on and tear with a coating twice as robust as concrete. You’ll also require a flat, stiff bristle brush, plastic watering can, garden hose, push broom, a 3/eight-inch roller with extension manage, roller tray and a two-inch, solvent-resistant brush.
What To Do
. Cautious preparation of the garage floor is essential for good end results. Making use of a push broom, sweep complete area to get rid of all dust and debris.
. Wet concrete surface, add Bond-Lok concentrate to three quarts of water in watering can to degrease, clean and etch in one step.
. Working in sections, sweep watering can back and forth although pouring to guarantee appropriate coverage. Use bristle brush to thoroughly scrub stains and spread cleaner.
. After every section is cleaned, rinse away dirt with a garden hose. Repeat procedure till whole surface has been cleaned, following with a final hose down of the garage.
. Wait till concrete is entirely dry (at least four hours) before epoxy application.
. Combine Portion An of item with Element B and allow epoxy to sit for 30 minutes before use.
. Beginning at the back of the garage, spread epoxy coating in smooth, even strokes across a two-by-6-foot region.
. If using color flakes, they must be applied to wet paint. Following covering each and every 2-by-6-foot section with the epoxy coating, lightly sprinkle flakes onto concrete.
. Continue procedure, working in sections, until complete garage surface is covered.
. Enable epoxy to harden for 12 to 24 hours prior to light foot visitors and 72 hours for automobile targeted traffic.
To know more about it, please go to: link
Related Posts
Tags
Share This
Recent Comments