Opening The Door To A Lovely Garage
In spite of getting the initial space that most homeowners see when they enter their houses, the garage is probably the most ignored and least talked-about room when it comes to residence improvement.
The standard bland and stained concrete garage floor suffers from years of heavy foot and car visitors. Luckily, there are techniques to make even the most beat-up garages appear great-and property owners can do it themselves. Specialist concrete epoxy coatings can revitalize a garage floor, make garage cleanup easier and aid stop the need for future pricey floor repairs. Here’s how to restore your floor.
Tools Of The Trade
To restore your garage floor, home owners will need to have Quikrete Epoxy Garage Floor Coating Kit (like instructional DVD). This all-in-one, effortless-to-use kit beautifies and protects concrete garage floors from hot tires, gasoline, oil, scuffs and put on and tear with a coating twice as sturdy as concrete. You will also want a flat, stiff bristle brush, plastic watering can, garden hose, push broom, a three/eight-inch roller with extension manage, roller tray and a 2-inch, solvent-resistant brush.
What To Do
. Cautious preparation of the garage floor is important for good end results. Employing a push broom, sweep complete area to take away all dust and debris.
. Wet concrete surface, add Bond-Lok concentrate to three quarts of water in watering can to degrease, clean and etch in one step.
. Working in sections, sweep watering can back and forth even though pouring to ensure suitable coverage. Use bristle brush to completely scrub stains and spread cleaner.
. Once every section is cleaned, rinse away dirt with a garden hose. Repeat procedure until whole surface has been cleaned, following with a final hose down of the garage.
. Wait till concrete is entirely dry (at least four hours) prior to epoxy application.
. Combine Element An of product with Element B and allow epoxy to sit for 30 minutes before use.
. Beginning at the back of the garage, spread epoxy coating in smooth, even strokes across a 2-by-6-foot region.
. If utilizing color flakes, they should be applied to wet paint. Right after covering each and every two-by-6-foot section with the epoxy coating, lightly sprinkle flakes onto concrete.
. Continue procedure, working in sections, until complete garage surface is covered.
. Enable epoxy to harden for 12 to 24 hours before light foot traffic and 72 hours for automobile targeted traffic.
For more, please go to: partner site
Related Posts
Tags
Share This
Recent Comments