Opening The Door To A Stunning Garage
Regardless of becoming the very first room that most home owners see when they enter their homes, the garage is possibly the most ignored and least talked-about room when it comes to home improvement.
The common bland and stained concrete garage floor suffers from years of heavy foot and auto targeted traffic. Fortunately, there are ways to make even the most beat-up garages look excellent-and home owners can do it themselves. Expert concrete epoxy coatings can revitalize a garage floor, make garage cleanup less difficult and help avert the need to have for future expensive floor repairs. Here’s how to restore your floor.
Tools Of The Trade
To restore your garage floor, property owners will want Quikrete Epoxy Garage Floor Coating Kit (which includes instructional DVD). This all-in-a single, simple-to-use kit beautifies and protects concrete garage floors from hot tires, gasoline, oil, scuffs and wear and tear with a coating twice as powerful as concrete. You are going to also need a flat, stiff bristle brush, plastic watering can, garden hose, push broom, a 3/8-inch roller with extension deal with, roller tray and a two-inch, solvent-resistant brush.
What To Do
. Careful preparation of the garage floor is vital for positive end benefits. Utilizing a push broom, sweep whole location to eliminate all dust and debris.
. Wet concrete surface, add Bond-Lok concentrate to 3 quarts of water in watering can to degrease, clean and etch in one particular step.
. Operating in sections, sweep watering can back and forth whilst pouring to make certain correct coverage. Use bristle brush to thoroughly scrub stains and spread cleaner.
. When each section is cleaned, rinse away dirt with a garden hose. Repeat process till entire surface has been cleaned, following with a final hose down of the garage.
. Wait till concrete is totally dry (at least 4 hours) ahead of epoxy application.
. Combine Component An of item with Component B and let epoxy to sit for 30 minutes ahead of use.
. Starting at the back of the garage, spread epoxy coating in smooth, even strokes across a two-by-6-foot area.
. If employing color flakes, they have to be applied to wet paint. After covering every two-by-6-foot section with the epoxy coating, lightly sprinkle flakes onto concrete.
. Continue process, operating in sections, until whole garage surface is covered.
. Permit epoxy to harden for 12 to 24 hours ahead of light foot traffic and 72 hours for automobile site visitors.
For more information, please go to: stained concrete flooring austin
Related Posts
Tags
Share This
Recent Comments