What Are Corning (Siecor) Unicam Connectors? Fiber Optic Tutorial Series One particular
For common epoxy and polish fiber optic connectors, the termination method generally consists of 7 steps (up to 30 minutes) which are:
1. Strip the optical fiber to expose the 125um (140um or other sizes based on your fiber) fiber cladding
2. Clean the exposed bare fiber with isopropyl alcohol and lint-totally free wipes
three. Insert the bare fiber into the connector center hole until …
The termination method for business regular epoxy and polish fiber optic connectors.
For common epoxy and polish fiber optic connectors, the termination method generally consists of 7 measures (up to 30 minutes) which are:
1. Strip the optical fiber to expose the 125um (140um or other sizes based on your fiber) fiber cladding
2. Clean the exposed bare fiber with isopropyl alcohol and lint-free of charge wipes
3. Insert the bare fiber into the connector center hole until the fiber stops
4. Inject fiber optic epoxy with a syringe dispenser into the connector body
5. Remedy the fiber optic epoxy with high temperature which could be 85C, 100C or even 120C depending on the type of fiber optic epoxy(you require a particular connector epoxy curing oven for this objective)
6. Scribe the fiber protruding from the tip of the fiber connector
7. Polish the connector tip with lapping films either by hand or specialized fiber optic connector polishing machine(specially for single mode fiber connectors)
So you see that the procedure for terminating optical fiber is a complicated procedure. It takes time and practice and only highly trained fiber optic technicians can do the work effectively with high yield ratio.
But fiber optic contractor installers for premise networks normally do not have the luxury of time or the high-priced tools for this sort of termination. And that is when rapid termination fiber optic connectors come into handy.
Fast termination fiber optic connectors are specially designed for quick termination with no lots of experience required. A fiber optic contractor installer can do a rapid termination inside two~three minutes.
There are a lot of various designs but the standard 1 such as Corning Siecor Unicam connector is like this:
The Unicam connector is pre-polished in factory with a fiber stub hidden inside the physique of the connector. The installer then only demands 5 methods to comprehensive an Unicam connector termination with industry regular top quality.
1. Strip the optical fiber to expose the 125um fiber cladding
2. Clean the exposed bare fiber with isopropyl alcohol and lint-free wipes
three. Cleave the fiber with a cleaver
4. Insert the fiber into the Unicam connector until it stops
five. Crimp the fiber onto the Unicam connector with a fiber connector crimper tool
A fiber optic contractor installer can make an Unicam connector termination within two minutes. Compared to the regular epoxy method (up to 30 minutes), that is 87% time saved.
Unicam connectors offer you equivalent insertion loss efficiency as a normal epoxy and polish connector. Unicam connectors also meet or exceed the mechanical and optical efficiency specified by EIA/TIA 568.B.
Fiber Optic For Sale Co stocks all varieties of Corning Siecor Unicam connectors like Unicam ST, TKT Unicam CTS SF, Corning TKT Unicam, Unicam LC, Unicam SC, Unicam tool kit and TKT Unicam Elite.
For more, please go to: logo
Related Posts
Tags
Share This
Recent Comments